null

AFS Alpha Performer Wingfoil

£1,499.00
Write a Review
Condition:
New
Weight:
3.00 KGS
Shipping:
Calculated at Checkout

AFS Alpha Performer Wingfoil

PUSH YOUR WING FOIL PRACTICE

The ALPHA PERFORMER foil completes the ALPHA range. It is divided into three parts: the ALPHA PERFORMER front wing, the ALPHA PERFORMER mast and the ALPHA PERFORMER stabilizers. The ALPHA PERFORMER mast has a thin profile providing maximum glide. It is offered on a short fuselage to provide more maneuverability and nervousness.

The PERFORMER range of stabilizers will allow you to improve in the discipline you want. The PERFORMER front wing is a wing with a thin profile in order to reach higher maximum speeds. It rises in the high revs without being limited to the speed of the wind. It offers excellent slip/glide.

A HIGH-PERFORMANCE, REMOVABLE FOIL

The TBAR (mast + fuselage) can only be made in one and the same part or else, to gain in compactness, it is also available as a removable one. On a one-piece TBAR, no additional screws and therefore simplified maintenance. On a removable TBAR, more compactness to travel with.

DON'T WORRY ABOUT WEIGHT

The full carbon construction brings rigidity and lightness to the foil.

NO MAINTENANCE

In the same way, you will no longer be bothered by marine aggressions such as corrosion which could weaken it.

FRONT WING

Thanks to a more refined profile compared to the Flyer and Carver sister ranges, the Performer will allow you to accelerate without being limited to the speed of the wind while maintaining control. It is available in 4 wing sizes (1250 cm2, 1450 cm2, 1650 cm2 and 1900 cm2).

STABILIZER

Perform SURF/SUP in 260 and 350 developed on an asymmetrical profile bringing lift to your navigations. They will be perfect for a dynamic practice.
Performer WING in 230 and 260 developed with a large wingspan but a reduced chord resulting in a stabilizer with a high aspect ratio. These stabilizers will bring you stability for high speeds. Their thin profiles will also bring you glide.

TBAR

The Performer mast benefits from a variable rope. The latter is widened at the plate level to increase the rigidity and therefore the take-off support. The submerged part of the mast has a weaker chord decreasing drag and increasing maneuverability. Its thin profile will bring glide to your freefly sessions. The foil/board fixing plate has been reworked in order to have the maximum configuration when adjusting your foil. The mast is made of high modulus carbon with a band applied to the leading edge to accentuate the rigidity and the feeling of control when sailing.

TABLE OF USE

P = Perform | F = Flyer | C = Carving

T = Draw | PW = Performer Wing | PS = Performer Surf/Sup

  – 65kg         65-70kg     70-75kg     75-80kg     80-85kg     85-90kg     90-95kg      + 95kg      
WING FOIL P1250 P1250 P1450  P1450  P1650 P1650 P1900  P1900 
SURF FOIL P1250 P1250 P1250 P1250 P1250 P1450  P1450  P1450 
SUP FOIL P1250 P1250 P1250 P1450  P1450  P1650 P1900  P1900 
WAKE FOIL P1250 P1250 P1250 P1250 P1250 P1250 P1250 P1250
KITE FOIL P1250 P1250 P1250 P1250 P1250 P1250 P1250 P1250
WINDSURF FOIL       P1250 P1250 P1250 P1450  P1450  P1450  P1450  P1650

 

MADE IN FRANCE

We master the manufacturing process from A to Z of our foils to ensure the best possible manufacturing quality. In addition, the prepreg construction allows operators to no longer breathe toxic fumes emanating from the resin. The preimpregnated fibers are cut using a laser machine, then assembled in a mold and finally baked at a certain pressure to obtain the desired shape.

PACK

The complete foil is sold in its case cover including a protective cover for the front wing and the stabilizer. It comes with screwdriver and screws (foil + board).