Freewing V3

Freshly released the V3 is the latest incarnation of the Freewing mainstream range.

t's a jack of all trades and has excellent peoformance on both flat water and wave environments.

Superior efficiencxy and ultra low flagout drag on this V3 version, it now has less low end power than the GO by quite a way, so recommended for tenacious beginners to experts.

Phazer V3

The Phazer v3 much revered test winning carbon foilboard is a cornerstone of the foiling industry.

Durable, yet incredibly light for maximunm pitch control, it has good rocker flat ensuring the lowest power take-off for their size.

The board has volume distribution that ensures you have the same stance at rest and at flight.

A curved outline for minimal touchdown during aggressive carves and higher power manoeuvres.

This is one, if not the most allround and performance boards that you can buy.

Compared to the Phazer v2:

The V3 has reduced width in the 66L, 78L, and 90L of between half an inch (12mm) and one inch (2.5cm) depending on the sizes.

This increases maneuverability and overall performance. We have also increased the nose rocker and added the high apex rail originally developed in the Compact.

This offers the feel of a smaller board when up and riding and maintains stability when getting up and going.

Phazer V3 Duratech

Carving oriented shape with a surf outline.
Convex nose area for soft touchdowns.
Hard release tail for early planing.

The all-new Duratech Phazer 5’10” and 6’2” provide a stable platform for light wind winging or the heavier rider.

The harder release edges, stepped rail, and flatter rocker get the Phazer planing early.

A wide tail creates a stable platform when light wind gliding or sub-planing with the deep step in the tail reducing catching when pumping onto the foil.

Trek Hydrofoil

The new Trek series of wings bring maximum ease and forgiving nature without sacrificing glide, stability or speed under load.

The smooth lift engages intuitively while remaining incredibly stable through slow and nervous first flights to powered, confident higher loads and speeds.

Smooth and agile when needed around corners it's a fantastic allrounder and the easiest entry to the world of hydrofoiling.

It uses the same components as the entire AK range meaning future upgrades are easy to add component by component.

Rear Stabiliser Choices

340 Moustache - The easiest and most popular rear stab. Best with the medium and larger front wings giving the most stable pitch and yaw control.
300 Moustache - Easy handling characteristics for smaller front wings.
260 Moustache - For the smallest wings and lightest riders
300 Arc Down - More efficient stabiliser for medium to small front wings that allows more yaw slip, works well with the Plasma.
260 Arc Down - Same as above for the smallest plasma and lightest riders.
Please note that the AK foils have a sliding adjustable mount on the stab so you can alter the power of the stabiliser and balance the foil according to your exact foot weighting preference.

Fuselage Choice

71cm Fuselage - by far the most popular and not a long fuselage in the grand scheme of things. Manoeuvrable with good pitch control, it's the allrounder.

61cm Fusealge - shot and agile for expert use. The fastest carving and most reactive of the two fuselages, but makes pitch stability highly reactive and a handful for all but experts.

Mast Length

Aluminium 60/70/80/95cm. All alloy masts need an alloy mast plate to mount to the board.
Carbon 80,90,105 - no mast plate needed, all 0 degree.

Alloy plate angle

The AK alloy masts use an alloy plate with two different angles; - 0 degree which is the standard mounting angle

- 1.5 degree, which will raise the nose of the board by 1.5 degrees for high speeds, steep waves at the expense of non foiling efficiency.