AFS Performer RS Rear Stabilizer

AFS Surf & RS Performer Stabiliser

Optimise the behaviour of your foil with a Performer stabiliser! - Adaptable to all AFS Alpha, Performer and Pure front wings for more specific rider needs in both performance and handling.

STABILISER - PERFORMER SURF
Product information
" Thin profile for glide
" Support at high speed
" Manoeuvrability and dynamism
" full carbon
" Made in France


Which program ?

Performer stabilisers are made in two ranges:
" Performer Surf for downwind, surf foil and freestyle practice. Developed to bring manoeuvrability and dynamism to your riding
" Performer RS for race practice, slalom. Developed to provide glide and stability at high Speed.

Should I think about a Tracer or Performer Stabiliser?

It all depends on your Riding style and location. The Tracer stabiliser allows you to practice all disciplines. It is a very tolerant stabiliser. The Performer stabiliser brings a boost to your performance and allows you to have a stabiliser that meets precise specifications compared to your desired activity.

CHOOSE YOUR STABILISER SIZE

A large stabiliser at the rear will provide lift. That is to say that it will really do help to start. It will also provide lateral stability thanks to its wingspan. The more we reduce the size of the stabiliser, the less drag we will have, and therefore the more we will have sensations of lightness, sensations of speed and above all manoeuvrability.

03
EVOLVE ON THE COMPLETE RANGE

The AFS Performer stabiliser range is available in 4 sizes (160 cm2, 190 cm2 for the Performer SURF/SUP range and 230 cm2 and 260 cm2 for the RS Performer range).

Thanks to a single T-BAR/Fuselage design for the ALPHA and PERFORMER range, all masts and fuselages are interchangeable (unless bonded model), meaning you will be able to swap between these wings as well as all the Wings and Stabilisers in the AFS Alpha & Performer range.

04
MADE IN FRANCE

We control the manufacturing process from A to Z of all our foils in our own factory, to ensure the best possible manufacturing quality. In addition, our exclusive pre-preg construction allows operators to no longer breathe toxic fumes emanating from the resin.

The pre-impregnated fibres are cut using a laser machine, then assembled in a mould and finally baked at the optimum pressure and temperature to obtain the desired shape and incredible strength to weight ratio only delivered by this sophisticated manufacturing process.

05
PACK

The stabiliser is sold with its cover and its hardware kit (2 screws of 25 mm + 1 screw of 25 mm as a spare).

RS230 Stabilizer - Area 230cm, AR 8.0, Span 435mm

RS260 Stabilizer - Area 260cm, AR 9.5, Span 500mm

PS260 Stabilizer - Area 260cm, AR 8.9, Span 480mm

PS350 Stabilizer - Area 350cm, AR 6.6, Span 480mm