North Clam Cleat for Booms
Replacement rope clam cleat for North windsurfing booms or extensions.
This part will fit many types of boom clamps and boom out haul fittings which have cleat which appears to be round moulded into them.
It tapers from the top (open end) which is approx 10.8mm in dia, enlarging towards the bottom which is approx 11.2mm in dia. It has a flat face front and rear which is approx 8mm wide at the top and approx 8.5mm at the base.
Old cleats will often pull out with needle nose pliers, if you heat the plastic in boiling water for 4 or 5 mins or they can be dissolved out with Caustic Soda - Please be extremely careful to protect yourself/others and the environment if using either of these methods to remove the old cleat!
Works with 4mm rope.
Part number: 14900-8090
Part 7 in diagram