Naish Nut and Bolt for Boom Front End

Naish Boom Lever Nut and Bolt Stainless steel Allen key bolt  

Naish Boom Lever Nut and Bolt with Shallow Head Shallow head bolt for 2005 booms where the levers had a narrower arm.  Prevents boom lever clamp rope fouling on the bolt head. Stainless steel...

Naish Boom Lever 2005 to 2009 (may well fit other years and make of booms) Replacement boom lever for >'05 Naish Booms Earlier production lever with slightly thinner arms requiring a bolt with a...

Naish Boom Lever 2002 Replacement boom lever for an '02 Naish Boom  Bolt sold separately.   Complete replacement Boom Heads available.

Neil Pryde Boom Nut & Bolt Replacement bolts and nuts (x1) for Neil Pryde boom lever. Suits: Evo II, X1, X3, X6, X9 booms Shaft diametre is 8mm and 56mm long without nut Stainless steel A4...

Naish Front End Badge 2005 Replacement Red Naish Badge for 2005 booms Clips on.

Naish Front End Body Replacement front end Body for an '02 Naish Boom  Bolts, Levers etc. sold separately.   Complete replacement Boom Heads available.

pack of 4 screws The pin body has an OD of 8mm (7.96mm on the one I measured) and the pin length is 28.6mm long to the underside of the head.