Performance Windfoil Foil Full Set (Demountable Travel Set)

This AFS foil can fully disassemble.  The foil is made up of the following parts and for the item on offer here, which is the Demountable Travel Set version.

1 x 95cm deep tuttle mast

1 x 94.5cm fuselage

1 x 900 front wing

1 x 240 rear stabilizer

The complete foil AFS PERFORMANCE WINDFOIL >2022 is moving towards a slalom – race program. Compared to our previous ranges, a glide optimization has been made in order to get even more performance, while remaining very accessible to all experienced riders.

The TBAR (95 cm mast/94.5 cm fuselage) is geared towards riders looking for performance in freeride/freerace practice. It is in fixed TBAR as Standard.

The Demountable Travel set, comes complete with Bags shown in this package & is normally special order, but we hold stock in the UK.

Note: the 95cm mast with demountable fuselage allows you to mount AFS Wingfoil foils and stabs using the AFS Switch, Performer and Alpha fuselages and all the foils specific to these - ask us for more help if you would like to more information on this?

The TBAR (100 cm mast/105 cm fuselage) – Ultra High Modulus construction. It is mainly intended for competitors or people doing up and down wind. It is in fixed TBAR Only.

The 240 stabilizer is a homogeneous stabilizer allowing you to sail in all light and strong wind conditions. With inertia and power, it will allow you to cross all the wind drops in the body of water.

The 200 stabilizer optimizes your performance to get more glide and speed. It is oriented towards a slalom/race practice.

This range is suitable for intermediate to expert level practitioners.

• Optimized glide
• Better upwind and downwind
• Wide range of use
• Made In France
• Full carbon

Front Wing Features

Rear Stabilizer

 Construction

Made of pre-preg carbon in France, the foil is stiff and light. With pre-preg fabrics, the carbon fibre is directly impregnated with epoxy resin during its manufacture. This guarantees a perfect ratio of epoxy and carbon, and represents the best quality process. Laser cut, then assembled in the form of a stack, the carbon fibres are then positioned in a mould which is mounted at high temperature, providing resistance and durability. From the machining of the moulds to the dispatch, everything is managed in our company in France, allowing us to have a quality process and a guaranteed finish.

The set comes with three covers: TBAR (for fixed T-Bar model), front wing and stabilizer, or Briefcase Bag with separate covers for Mast and front foil/stabiliser for the Demountable Travel Set  The screws are also included as well as the TX30 screwdriver to assemble the foil.