Quick Release Fin Screw

Nautix Screw and Nut for US box fins A replacement Screw and Nut for most US box fins that have flat upper surface and require a 4mm screw.Brass M4 Nut.  Slot head slightly domed Stainless Steel...

Prolimit Fin Screw and Nut for US box fin A replacement Screw and Nut for most US box fins that have flat upper surface and require a 4mm screw.Brass M4 Nut.  Slot head slightly domed Stainless...

Windsurfing Fin Screw with Washers If you have lost your fin screw replace it with a posi pan M6 screw (or slot screw in 100mm) with a metal washer and a rubber washer. Please check that you have...

Urethane Washer for Fin Screw  Made for M6 screws with an 5.7m I.D. to grip the screw x 18mm OD x 3mm thick for Fin/Foil Screws.High Quality Urethane washer with large outside diameter to suit...

Sabfoil Kraken Quick Release Mast System Thanks to this upgrade you can decide to leave the plate (P02K) or the tuttle (T03K) connected to the board and to mount the rest of the hydrofoil in a few...

Red Paddle Co Quick Fit US Fin Bolt Replacement Red Paddle Co SUP US type fin bolt for Race, Elite or Touring boards.  Easily screw in your fin by hand without the need for additional tools.

Prolimit Windsurfing Quick Release Spreader Bar Single Webbing 24cm bar - normal size for XS and Small Harness's28cm bar - normal size for Med, Large and XL Harness's  Pin release spreader bar...

Replacement Brass Plate for Quick Release System (Q01K) Pack contains