Which is the best Wing Foil Harness Line for you?

First we need to decide what the Wing Foil harness line is going to attach to, soft wing handle, solid wing handle or wing boom? If this first questions has already tripped you up on which of these is the best check out our blog on this topic below:

Handle boom pic & link

Soft Wing Handles

These are the more traditional handle type, sewn onto the wing center strut. The majority of wings with these handles also had harness attachment points right over the center of lift on the wing, taking the guess work out of line placement. The alternative is to attach the line directly to the handles. In both cases a harness line that loops through one handle and ties off onto a seperate dyneema loop is a good option.

Ozone Wing/Parawing Bungee Harness Line V3

Forward Wip Wing Harness Line

Solid wing handle

Solid wing handles fasten onto the centre strut and provide more direct control. Harness lines tend to be connnected ditectly onto these. Thinner lines tend to cut into the foam grip so harness lines that have webbing on each end work best.

Forward Wip Wing Harness Line 2.0

Wing boom

Wing booms attach to the wing in much the same way as most modern hard handles. Wing booms require a little more tweeking of the harness line placement to get them in the correct spot. too far back and the front of the wing is going to be over powered and pivot down wind. Too far up and the wing will stall into the wind end up being pushed toward you as thw wind will only hit one side of the wing. Again some webbing on either end of the hanress line will hold the line in place without ripping or cutting into the hand grip.