Universal SW Alu 1750 Hydrofoil
DESCRIPTION
The Universal ALU foil set is the tool to enter the exhilarating foil dimension. You can switch the use of this phenomenal set from Wing, to Surf, to SUP, to Kite foiling without the need to change your hydrofoil! This hydrofoil is capable of speeding up the learning process as you never thought was possible.
The new Universal SW alu is available in two versions with 75 cm or 85 cm aluminum mast. The 75 cm mast is recommended to better keep control during your first flights, while the 85 cm mast is preferable once you progress and are able to ride for longer distances.
The new Universal SW 1750 full carbon front wing is the engine of the whole system. Its generous wingspan and thicker profile will create the right lift to start foiling at low board speed and help to keep stability and control once you are flying! Your jibes and tacks are going to be so easy and you will learn how to pump on flat water or ground small swell. The rear wing is 52 cm wide and has a negative dihedral angle of -26°. This angled wing design improves the “pumping” and carving ability of the foil. This hydrofoil is capable of speeding up the learning process as you never thought was possible!
Recommended for novice riders, the ideal hydrofoil for schools.
FEATURES
- 1750cm2 full carbon Universal front wing
- 373 cm2 Universal carbon rear wing
- New 30% stiffer and lighter aluminum mast with integrated plate
- New redesigned 76 cm light Universal fuselage
- Solid connection using 8 mm diameter Torx screws and helicoil threads for mast, fuselage and wings adding 6 mm sideways telescope screws to secure the mast at the top plate and fuselage. A reliable, strong and quick to assemble/disassemble connection
- New wider Hi density plastic mast foot connector/adaptor for improved lateral stiffness. No oxidation between mast and fuselage
- Each component comes with an EVA Cover with Velcro to fasten it inside the bag (foil set bag supplied separately).
