Windsurfing Fin Bolt

Windsurfing Fin Screw with Washers If you have lost your fin screw replace it with a posi pan M6 screw (or slot screw in 100mm) with a metal washer and a rubber washer. Please check that you have...

SELECT S.MAXWindsurfing Fin - Pre-preg Carbon Custom Moulded, hand finished - for SLALOM / FREERACE / FREERIDE boards (from 90 to 165 litres)Lengths 29 / 31 / 33 / 35 / 37 / 39 / 41 / 43 / 45 / 47 /...

Urethane Washer for Fin Screw  Made for M6 screws with an 5.7m I.D. to grip the screw x 18mm OD x 3mm thick for Fin/Foil Screws.High Quality Urethane washer with large outside diameter to suit...

New MFC Tuttle box G10 Windsurfing fin (picture does not show the tuttle box head) MAUI FIN CO. LIQUID PRO (2016) New outline, new profile, new materials, the LIQUID PRO is the new...

Rear centre fin for an STX iwindsurf board or any sup board with a US fin box 9 inch in height comes with finger tighten nut and plate

Quick release plate for all Two-Bolt "Quick Release" Mast Bases. Includes mounting hardware. Lower plate assembly only for all 2-Bolt Mast Bases